Molding Silicone,Silicon Rubber For Big Size Molds

Silicon rubber for mold making applications
Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Silicon rubber for mold making features
Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50A° After curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

Silicon rubber for mold making operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: Our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )

Frequently asked questions of moulding silicone rubber
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: Adding too much silicone oil which will destroy the molecular of silicone rubber; Making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; Making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.

For get further information about our silicone product, PLS contact with Miss Firleanna

Tel: 0086-75585212365

Mob:086-18938867520

E-mail: hyjb(at)szrl(dot)net

Silicone

Production mold casting wax, gypsum, concrete or resins (urethane, polyester, etc. )
1) Excellent performance
2)High tear strength
3) Resistance to high temperature
4) Competitive price
5) Samples are available

Brushable silicon, which features an exceptional fluidity and good operability. When mixed with 2%-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.

molding silicone-Brushable silicon features: Brushable silicon is white or red flowing liquid with general hardness of 22-50 shore A after curing. If the customer wants to make large products and large size molds, the mold should be made of RTV-2 silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns, brushable silicon should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.

molding silicone-Brushable silicon(630#) is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. Brushable silicon is suitable for small products or fine and precision products which is difficult to demould. molding silicone-Brushable silicon is one of mold making silicone rubber with the highest use level in the production of craftwork gifts and the shrinkage is up to 0.2%
(1) With SGS and RoHS approval
(2) Normally Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5) Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample are available

For get further information about

Pad Printing Silicone Rubber,RTV-2 Pad Printing Silicone

The pad printing silicone rubber usages:
The silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers. Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.

Pad printing silicone rubber features:
Pad printing silicone rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors are available and our catalyst is free charged.

Pad printing silicone rubber operation instructions:
Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100: 2-3, eg. We take 100grams of liquid silicone rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.

For get further information about pad printing silicone rubber, PLS contact with Miss Joy

 Mob:86-18938867578
    86-13554758940
Email: hyk@szrl.net
Skype:joy-chow
Web:www.sellsilicon.com

http://www.sellsilicon.com/pid11030/Pad+printing+silicone+rubber%2cRTV-2+Pad+Printing+Silicone.htm

Silicone Rubber Soap Moulds Applications

Silicone Rubber Soap Moulds applications

Silicone Rubber Soap Moulds applications
 Silicone Rubber Soap Moulds is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

 

Silicone Rubber Soap Moulds features description
 Silicone Rubber Soap Moulds is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

Silicone Rubber Soap Moulds operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)

Frequently asked questions of Silicone Rubber Soap Moulds 
Why does the silicone rubber mold have few molding times?
       Silicone Rubber Soap Moulds has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. 

For get further information about  Soap Moulds Silicone Rubber, PLS contact with Miss Joy

Mob:86-18938867578
    86-13554758940
Email: hyk@szrl.net
Skype:joy-chow
Web:www.sellsilicon.com
http://www.sellsilicon.com/pid11406592/Silicone+Rubber+Soap+Moulds+applications.htm

Silicone

rtv2 silicone for adult dolls Description:

   rtv2 silicone for adult dolls HY-968 is two-component addition cure heating or room temperature vulcanizing silicone rubber. The product, which is colorless or skin-colored oily liquid and becomes soft elastic material after vulcanization, can be used for making soft silicone rubber products like human body shape, bra pads, shoulder pads, patchs, antislip mat, and also can be used for pouring material for electronic and electrical parts.

rtv2 silicone for adult dolls Standard Datasheet:

Model	HY-968
Component
	A		B
Color	Transparent		Transparent
Mix ratio (%)	1		1
Viscosity (cps)	2000~ 6800
Pot life (H)	0.5
Curing time (H)	1~2
Elongation (%)	≥350
Tensile strength (Mpa)	≥1.5
Tear strength (KN/m)	≥11
Hardness (A°)	Hardness can be sdjusted according to the requirements of customers (0~18A°)

 rtv2 silicone for adult dolls Features:

 rtv2 silicone for adult dolls can be used for a long period and maintain softness and elasticity within a temperature range of -65°C ~ 200°C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic,odourless, low linear shrinkage, easy operation, etc.

 rtv2 silicone for adult dolls Using instructions:

Mix component A and component B evenly according to the mixing proportion of 1:0.95-1.05, and can be poured after deaired the bubbles. The operating time (0.5-3) hrs  depends on the temperature; the curing time is 12-24 hrs at the room temperature; and the curing time can be reduced to 10 minutes with the temperature increased to 80~120°C. The operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 1 hour. The product can be produced in red, yellow, etc. according to the  customer's requirements. 

  

rtv2 silicone for adult dolls Precautions:

 rtv2 silicone for adult dolls is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch  those substances during using.

  rtv2 silicone for adult dolls Package:

Component A and B are in 20kg per drum. Transportation regard as non-hazardous goods, with shelf life of half year, hermetically sealed, with prevention from being in contact with acid, alkaline, and other impurities.

For get further information about our silicone product, PLS contact with Ms Joy Chow

Mob:86-18938867578
    86-13554758940
Email: hyk@szrl.net
Skype:joy-chow
Web:www.sellsilicon.com

http://www.sellsilicon.com/pid11509548/silicone.htm

RTV2 Silicones For Molds

 RTV2 silicones for molds

 RTV2 silicones for molds usage

RTV2 silicones for PU molds  is mainly used for poly resin crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, RTV2 silicones for PU molds applicable for lighting and candles crafts, plastic toy, statuonery gifts crafts industry, 

RTV2 silicones for molds is used for Buddha, relievo furniture, funiture decorative materials, statues Buddha, artifacts RTV2 silicones for PU molds is suitable for copied, building decoration materials, large-scale cement mould, artificial fossils RTV2 silicones for PU molds is good for Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

 

RTV2 silicones for PU molds features

Liquid silicones for PU molds  is flowing liquid with general hardness of 22-50 A° after curing. Liquid silicones for PU molds is a kind elastic silicon rubber mould which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Our curing agent is free charged.

 

 RTV2 silicones for molds specifications for your reference

HY silicone 628
 

Standard Datasheet

Model	Appearance	Viscosity (cs)	Hardness (Ao)	Tensile Strength (kgf/c)	Tear Strength (kgf/)	Elongation (%)	Mixing ratio(%)	Operating Time(H)	Curing Time(H)
628	White	14000~16000	25~28	≥35	≥25	≥500	2~3	0.5	2~4

 

Are there any question abt RTV2 silicones for  molds pls feel free to ask Ms.Joy

Tel: 086-0755-89212380
Cell phone:086- 13554758940/18938867578
Fax: 086-0755-89948030


Key Words: silicone rubber, RTV2 silicones for PU molds ,Liquid silicones for PU molds ,   liquid silicone rubber   liquid silicone rubber for mold making in pouring way  silicone rubber manufacture  silicone rubber price
http://www.sellsilicon.com/pid11517269/RTV2+silicones+for+molds.htm

Silicone

Mold silicon for resin craft applications
Resin craft silicon use in mold making field for toy gifts and craftwork gifts, poly technique, lightings, candles, and molds in multiple pieces.
Mold silicon for resin craft  features
Silicone rubber with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2.
Mmold silicon for resin craft using instruction
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.

For get further information about  mold silicon for resin craft, PLS contact with Rose:

Tel: 0086-755-89948294

Mob:086-18938867525

E-mail: hyw(at)szrl(dot)net

Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid11044/silicone.htm

Molding Silicone,Lead-tin Alloy Craft Silicone Disc

The lead-tin alloy craft silicone disc is mainly applicable to alloy crafts, lead-zinc arts and crafts, gold and silver jewellery, imitation of gold and silver ornaments, fishing tools, bracelets, hanging ornaments, furniture fittings, decoration accessories, toys and gifts, etc.

Items	Technical datasheet
Model	HY-455
Gravity(g/c㎡)	1.70
Hardness(shore A)	85-87
Elongation at break (%)	68-69
Tensile strength (Kgf/c㎡)	41.21
Tear strength (Kgf/cm)	16.95

Lead-tin Alloy Craft Silicone Disc Description: The disc silicone rubber consist of Past A and Part B, Part A is the working surface, Part B acts secondary role. It mainly applicable to cast lead tin craftworks and product models.Fix the product upon one piece of A, cover with another pieces of A , and put pieces of Part B over the upper  and lower sides of Part A, then take it to a press molding machine, the temperature is generally at 160～180℃, and it can be demouled in 30 minutes. After take out the mold, make a round hole at the central point of the disc with diameter of 30mm for material injection, inject the lead-tin alloy liquid into the disc silicone mold,the products can be shaped by the force of a mode of centrifuge.

Lead-tin Alloy Craft Silicone Disc Features and properties:
1.Temperature resistance of 380℃～400℃ or even higher.
2.Fast cooling,easy to grinding and polish.
3. The usual sizes are 9 inches and 12 inches. Thickness is 4.5~5mm, special requirements can be customized.

 

For get further information about our silicone product, PLS contact with Miss Rose

Tel: 0086-75589948294

Mob:086-18938867525
E-mail: hyjz(at)szrl(dot)net
Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid82838/molding+silicone%2cLead-tin+Alloy+Craft+Silicone+Disc.htm

Silicone

Mold silicon for resin craft applications 
Resin craft silicon use in mold making field for toy gifts and craftwork gifts, poly technique, lightings, candles, and molds in multiple pieces.

Mold silicon for resin craft  features 
Silicone rubber with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2.

Mmold silicon for resin craft using instruction
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.

For get further information about  mold silicon for resin craft, PLS contact with Rose:

Tel: 0086-755-89948294

Mob:086-18938867525

E-mail: hyw(at)szrl(dot)net

Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid11044/silicone.htm

Silicone

mold making silicone rubber for sandstone products  applications

 mold making silicone rubber for sandstone products  isprimarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsumcrafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy ,stationery gifts crafts industry, a large statue Buddha, relievo furniture,furniture decorative materials, statues Buddha, artifacts copied, buildingdecoration materials, large-scale cement mold, artificial fossilsFactory,Europe component factory, simulation landscapes, animals andplants sculpture, sandstone crafts and so on.

   mold making silicone rubber for sandstone products features

 mold making silicone rubber for sandstone products  is white orred flowing liquid with general hardness of 22-50 shore A ,after curing.Molding silicon rubber is a kind elastic silicon rubber mold which featureswith resistance to deformation, high-temperature, acid-alkali and expansion aswell as high reproduction times, good tensile strength ,tear strength andelongation.

Technical Datesheet of    mold making silicone rubber forsandstone products 

Model	Appearance	Viscosity (cP)	Hardness (Shore A)	Tensile strength (MPa)	Tear-strength (kN/m)	Elongation (%)	Mixing ratio ( %)	Pot life( min)	Curing time (h)
615	white	9000±3000	15±2	≥2.5	≥15	≥400	2~3	30~60	2~5
620	white	13000±3000	20±2	≥3.0	≥15	≥400	2~3	30~60	2~5
625	white	19000±3000	25±2	≥3.2	≥18	≥380	2~3	30~60	2~5
630	white	24000±3000	28±2	≥3.8	≥20	≥380	2~3	30~60	2~5

For get further information about our silicone product, PLScontact with Miss Rose 

Mobile:086-18938867525

TEL: 0086-755-89948294

FAX: 086-755-89948030

http://www.sellsilicon.com/pid11507578/silicone.htm

RTV Silicone For Gypsum Mold Making

 RTV Silicone for Gypsum Mold Making Performance:

 RTV Silicone for Gypsum Mold Making,Our E series rtv-2 addition cure mold making silicone is with the all the advantage of rtv-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any  by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside  simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making.

  

 RTV Silicone for Gypsum Mold Making applications:

 RTV Silicone for Gypsum Mold Making,This product can be used in not only the field of common RTV-2 moldmaking silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has no problem of deep vulcanize or reverse reaction, ect problem. Therefore, our addition cure silicone is particularly applicable for large stones, plaster and cement product replication. It features with lower viscosity, high strength , good fluidity, can also be very suitable for precision complex pattern of the original copy.

For get further information about   RTV Silicone for Gypsum Mold Making , PLS contact with Miss Rose

Tel: 0086-75589948294

Mob:086-18938867525

E-mail: hyjz@szrl.net

Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid11406440/RTV+Silicone+for+Gypsum+Mold+Making.htm

Decroration Crafts Liquid Mold Silicone Rubber

Decorationcrafts liquid mold silicone rubber applications

Liquid mold silicone rubber for decoration ornamental crafts moldingmaking is primarily intended for poly resin crafts, PU crafts, decoration ornamental crafts, PUresin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candlescrafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha,relievo furniture, furniture decorative materials, statues Buddha, artifactscopied, building decoration materials, large-scale cement mold, artificialfossils Factory, Europe component factory, simulation landscapes, animalsand plants sculpture, sandstone crafts and so on.

  

Decorationcrafts liquid mold silicone rubber features description

liquid silicone rubber for decorationornamental crafts mold making is white or red flowing liquid with generalhardness of 22-50A°after curing. Moldingliquid silicone rubber is a kind elastic silicone rubber which features with resistance to deformation, high-temperature, acid-alkaliand expansion as well as high reproduction times, good tensile strength, tearstrength and elongation.

  

Decorationcrafts liquid mold silicone rubber operations

Ifthe customer wants to make large decoration ornamental crafts products andlarge size molds, the mold should be made of liquid silicone rubber with highhardness. On the contrary, if the mold with fine andprecision patterns, it should be made of liquid silicone rubber  withlow hardness. The amount of the curing agent depends on the actual requirementsof the customer. If molds requiring fast drying and demold, more curingagent is needed; contrarily, if molds requiring slower drying and demold,less curing agent is needed.

For getfurther information about our crafts liquid mold silicone rubber, PLS contactwith Miss Rose

Mobile:086-18938867525

TEL: 0086-75589948294

FAX:086-755-89948030http://www.sellsilicon.com/pid11505726/decroration+crafts+liquid+mold+silicone+rubber.htm

HY E-640 Silicone Rubber

Description for addition molding silicone

HY- E640# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

Applications for addition molding silicone,

HY- E640# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Operation instruction of addition molding silicone:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail

For get further information about addition molding silicone, PLS contact with Miss Rose

Tel: 0086-75589948294

Mob:086-18938867525

E-mail: hyjz@szrl.net

Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid11405918/HY+E-640+silicone+rubber.htm

Silicone Rubber Equal To Dow Corning 3481

Applications of silicone rubber Equal to Dow Corning 3481

Equal to Dow Corning 3481( Silicone Rubber) is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Features of silicone rubber Equal to Dow Corning 3481

Equal to Dow Corning 3481( Silicone Rubber) is white or red flowing liquid with general hardness of 22-50shore A after curing. Molding silicone rubber is a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.

Why does the silicone mold get burnt out?

The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile-strength	Tear-strength	Viscosity (mPas)	Shrinkage rate (%)	Elongation (%)
HongYe625#	white	100 : 5	45-60	4-6	23-26	45kgf/cm2	≥ 29kgf/cm	20000	≤0.3%	450%
HongYe630#	white	100 :5	30-40	3-5	29-31	49kgf/cm2	≥ 33kgf/cm	26000	≤0.3%	490%
Dowcorning3481	white	100 : 5	30-45	5-6	22-25	4.6Mpa	23kN/m	25000	≤0.5%	520%
Bluestar (3325 /585)	white	100 : 5	20-60	6-24	25-28	4.2Mpa	26kN/m	35000	≤0.7%	440%
Wacker®M4503	white	100 : 5	30-90	10-20	25	5.0(N/mm²	> 20N/mm	40000	≤0.5%	350%
SmoothonMoldMax®25	white	100 : 5	45	24	25	577psi	130pli	25000	002 in./in.	375%

For get further information about silicone rubber Equal to Dow Corning 3481, PLS contact with Miss Rose

Tel: 0086-75589948294

Mob:086-18938867525

E-mail: hyjz@szrl.net

Msn: ross1024@msn.cn

Skype: LuoYan1012

http://www.sellsilicon.com/pid11405551/Silicone+Rubber+Equal+to+Dow+Corning+3481.htm