The lead-tin alloy craft silicone disc is mainly
applicable to alloy crafts, lead-zinc arts and crafts, gold and silver
jewellery, imitation of gold and silver ornaments, fishing tools,
bracelets, hanging ornaments, furniture fittings, decoration
accessories, toys and gifts, etc.
| Items | Technical datasheet |
| Model | HY-455 |
| Gravity(g/c㎡) | 1.70 |
| Hardness(shore A) | 85-87 |
| Elongation at break (%) | 68-69 |
| Tensile strength (Kgf/c㎡) | 41.21 |
| Tear strength (Kgf/cm) | 16.95 |
Lead-tin Alloy Craft Silicone Disc Description: The disc silicone rubber
consist of Past A and Part B, Part A is the working surface, Part
B acts secondary role. It mainly applicable to cast lead tin craftworks
and product models.Fix the product upon one piece of A, cover with
another pieces of A , and put pieces of Part B over the upper and lower
sides of Part A, then take it to a press molding machine, the
temperature is generally at 160～180℃, and it can be demouled in 30
minutes. After take out the mold, make a round hole at the central point
of the disc with diameter of 30mm for material injection, inject the
lead-tin alloy liquid into the disc silicone mold,the products can be
shaped by the force of a mode of centrifuge.
Lead-tin Alloy Craft Silicone Disc Features and properties:
1.Temperature resistance of 380℃～400℃ or even higher.
2.Fast cooling,easy to grinding and polish.
3. The usual sizes are 9 inches and 12 inches. Thickness is 4.5~5mm, special requirements can be customized.
1.Temperature resistance of 380℃～400℃ or even higher.
2.Fast cooling,easy to grinding and polish.
3. The usual sizes are 9 inches and 12 inches. Thickness is 4.5~5mm, special requirements can be customized.
For get further information about our silicone product, PLS contact with Miss Rose
Tel: 0086-75589948294
Mob:086-18938867525E-mail: hyjz(at)szrl(dot)net
Msn: ross1024@msn.cn
Skype: LuoYan1012
No comments:
Post a Comment